Volkswagen Touran Service Manual: Crimping Pliers with Insert
|The Crimping Pliers without Insert -VAS1978/1- with Crimping
Pliers - Insert 2 -VAS1978/2- is a component of the Wiring
Harness Repair Set -VAS1978- and is used to crimp the connector
during the wiring harness repair.
|Color of Crimp
||Color of Crimping Slot
- 1.0 mm2
- 2.5 mm2
- 6.0 mm2
|The Wiring Harness Repair - Crimping Plier - Base Tool
-VAS1978/1-2- can also be used together with the Wiring Harness
Repair - Crimping Head - .35-2.5mm -VAS1978/1-1- or Wiring
Harness Repair Set - Crimping Head - 4-6mm -VAS1978/2A- to crimp
the connectors as an alternative. Refer to
→ Chapter "Crimping Pliers - .35-2.5mm -VAS1978/1A-".
|Always be sure to use the correct crimping slot for the
crimping connection used.
|Do not crimp wire insulation.
The Release Tool Set -VAS1978/35- is used to release the
various primary and secondary locking mechanisms on VW-group
vehicles. The set consists of 26 different tools ...
Various release tools are used to remove the different
terminals from terminal housings without damage.
A selection of release tools are a component ...
2017-2021 © Copyright www.oticasveja.site