VW Touran manuals

Volkswagen Touran Service Manual: Flat Spots

What is a Flat Spot From Standing?
Terms like flat portion, flattening, are also used as a term for flat spots from standing.
Flat spots from standing cause vibration, like an incorrectly balanced wheel. It is important to recognize a flat spot in the tread from standing as such!
Flat spots from standing cannot be corrected by balancing, and can occur again at any time under various circumstances. Flat spots from standing can be corrected without complicated special tools. Providing that the flat spot was not caused by wheel lock during hard braking. Refer to → Chapter "Wear Spots".
  Note
Wear spots due to wheel lock are irreparable! Tires with such damage must be replaced.
Causes of Flat Spots from Standing:
The vehicle stands for several weeks in a location without being moved.
Tire pressure is too low.
The vehicle was placed in a paint system drying cabinet after painting.
The vehicle was parked with warm tires in a cold garage or similar for a long time. In this case, a flat spot can develop overnight.
  Correct the flat spots. Refer to → Chapter "Flat Spots, Correcting".
   
    Tires, Evaluating
    ...

    Cracking
    Cracking is the term for shallow cracks in the sidewall of the tire. They run starting from the bulge in the direction of the tire shoulder. Se ...

    Other materials:

    Volkswagen Touran Owners Manual. Introduction
    This chapter contains information on the following subjects:  → Indicator lamps    → Turn signal and main beam lever    → Switching lights on and off    → Lights and vision – functions    → Main beam control R ...

    Volkswagen Touran Service Manual. Two-Part VHS Hardener and Two-Part VHS Performance Hardener
    Definition: Two-Part VHS Hardener -LHA 009 051 A2-/-LVM 009 051 A5- Two-Part VHS Hardener, Short -LHA 009 050 A2- Two-Part VHS Hardener, Long -LHA 009 052 A2-/-LHA 009 052 A3- ...

    2017-2021 © Copyright www.oticasveja.site