Volkswagen Touran Owners Manual: Headlight range control, instrument and switch lighting

Volkswagen Touran Owners Manual / Before the journey / Lights and vision / Lights / Headlight range control, instrument and switch lighting

Fig. 77 Next to the steering wheel: control for instrument and switch lighting ① and headlight range control ②

First read and observe the introductory information and safety warnings

① Instrument and switch lighting

When the headlights are switched on, the brightness of the instruments and switch lighting can be regulated to suit your requirements by turning the control .

② Headlight range control

Depending on what level it is set to, the headlight range control adjusts the position of the light cones in the headlights according to the load that the vehicle is carrying. This gives the driver the best visibility possible and means that oncoming traffic will not be dazzled .

The headlights can only be adjusted when the dipped beam headlights are switched on.

To adjust, turn the control to:
Setting	Vehicle load^a)
вЂ“	Front seats occupied and luggage compartment empty.
1	All seats occupied and luggage compartment empty.
2	All seats occupied and luggage compartment fully loaded. Towing a trailer with a low drawbar load.
3	Only the driver seat occupied and luggage compartment fully loaded. Towing a trailer with maximum drawbar load.

Dynamic headlight range control

There is no control ② for headlight range if the vehicle has dynamic headlight control. The headlight range is automatically adapted to suit the vehicle load as soon as the headlights are switched on.

Instrument cluster lighting

In vehicles with daytime running lights, the instrument cluster lighting switches off automatically in darkness and, for example, when driving through a tunnel. In this way, the driver is prompted to switch on the dipped beam so that the vehicle's rear lights are switched on .

WARNING

Heavy objects in the vehicle can cause the headlights to dazzle and distract other road users. This could lead to accidents and serious injuries.

The light cone should always be adjusted to the payload of the vehicle to ensure that other road users are not dazzled.

^a) If you have different loads, you can select a position between the settings.

Coming home and Leaving home functions (orientation lighting)

First read and observe the introductory information and safety warnings The Coming home function must be switched on manually. However, the Leaving home function is controlled automatically ...

Interior and reading lights

First read and observe the introductory information and safety warnings Button / Position Function Switches off the interior lights ...

Other materials:

Volkswagen Touran Service Manual. Vibration
Vibration, Causes for Vibration There are many causes for vibration. Vibration can also be caused by tire wear, among other things. Tire wear caused by driving does not always develop evenly over the entire tread. Due to this, a slight imbalance develops whic ...

Volkswagen Touran Service Manual. Run-Flat Tire, Seal Inside-Technology
The vehicle can be equipped with run-flat tires as an option. The Seal Inside technology is a system that allows the vehicle to continue driving even if the tire has been punctured by a nail or screw: a protective coating on the in ...