First read and observe the introductory information
and safety warnings 
The Hill Hold assist function actively holds the vehicle when pulling away on an incline.
The hill hold assist function is automatically activated if the following conditions are met
Conditions: points 1 to 3 must be fulfilled at the same time: | ||
---|---|---|
Manual gearbox | Automatic gearbox | |
1. | On an incline, the stationary vehicle must be held in position with the footbrake until the vehicle starts moving. | |
2. | The engine is running smoothly. | |
3. | Fully depress the clutch pedal and move the gear stick to the 1st gear position if you want to drive forwards up a hill or to the R position if you want to reverse up a hill. | The gear R, D or S has been selected. |
In order to start moving, remove your foot from the brake pedal, then simultaneously release the clutch pedal (clutch engages) and press the accelerator. The brake will gradually be released as the clutch is engaged. | To start moving, remove your foot from the brake pedal and press the accelerator immediately. The brake will gradually be released as the vehicle pulls away. |
The Hill Hold assist function will be deactivated immediately:
Volkswagen Touran Owners Manual. Belt clip
Fig. 63 On the right outer
seat of the second row of seats: belt clip
First read and observe the introductory information
and safety warnings Belt clips are located on each of
the outer seats on the second row of seats. They prevent the belt from twisting,
thus preventing damage to t ...
Volkswagen Touran Service Manual. Two-Part HS Vario Clear Coat
Definition:
Two-Part HS Vario Clear Coat -L2K 769 K01 A5-
Edition 06/2013
Product Description
Two-part HS vario clear coat is a VOC compliant (VOC value
less than 420 g/L), h ...