Fig. 22 Buttons in the vehicle key
Function | Buttons to be used in the vehicle key | Action carried out with key in the lock cylinder Remove the cover of the lock cylinder if necessary . |
---|---|---|
Unlocks the vehicle. | Press
![]() |
Insert the vehicle key in the driver door lock cylinder and turn anti-clockwise. Turn and hold for convenience opening. |
Locks the vehicle. | Press ![]() |
Insert the vehicle key in the driver door lock cylinder and turn clockwise. Turn and hold for convenience closing. |
Unlocks the tailgate. | Press
![]() |
Insert the vehicle key in the driver door lock cylinder and turn anti-clockwise. |
Please note: depending on the settings made
for the central locking system in the Convenience sub-menu, all of the doors and
the tailgate may only be unlocked once the button
has been pressed twice .
The vehicle key will lock and unlock the vehicle only when the battery has enough power and the key is located within a few metres of the vehicle.
If the turn signals do not flash as confirmation, at least one of the doors, the tailgate or the bonnet is not locked.
The vehicle cannot be locked using the vehicle key if the driver door is still open. The vehicle will be locked again if you do not open one of the doors or the tailgate within a few seconds automatically after unlocking the car. This function prevents the vehicle from remaining unlocked if the unlocking button is pressed by mistake.
Convenience opening and closing
Volkswagen Touran Owners Manual. General information on transporting children in the vehicle
First read and observe the introductory information
and safety warnings Legislation and legal requirements
take precedence over the descriptions in this owner's manual. Various standards
and regulations control the use of child seats and methods for securing them ().
For example, this ...
Volkswagen Touran Service Manual. Brush Grinder Set -VAS6776
Definition:
Brush Grinder Set -VAS6776-
Product Description:
The device is used to clean surfaces and remove corrosion in
hard to reach areas. For example, it is suitable for joints,
grooves, ...