First read and observe the introductory information and safety warningsвЂ‰
The multi-function display (MFD) is equipped with two automatic memories: 1 - Trip memory and 2 - Total journey memory. The number of the current memory on display will be shown in the upper right-hand corner of the display.
|When the ignition is switched on and memory 1 or 2 is shown in the display, press the OK button to switch between the two memories.|
|1||Trip memory||The memory collects the travel and fuel consumption
data from the moment the ignition is switched on until it is switched off.
If the journey is interrupted for more than two hours, the memory is automatically deleted. If the journey is continued within two hours of the ignition being switched off, the new values will be added to the existing trip recorder.
|2||Total journey memory||The memory collects journey data for any number of individual journeys up to a total of 19 hours and 59 minutes or 99 hours and 59 minutes journey time or 1999.9 km (miles) or 9999 km (miles) distance travelled. If one of these maximum marksa) is exceeded, the memory is automatically deleted and starts again at 0.|
|Driving time||Driving time in hours (h) and minutes (min) that has elapsed since the ignition was switched on.|
|Current fuel consumption||The current fuel consumption is indicated in l/100 km (mpg) if the vehicle
is moving and in litres/h (gallons/h) if the engine is on and the vehicle
is at a standstill.
In vehicles with a natural gas engine, the current fuel consumption is indicated in kg/100 km or m3/100 km (mls/kg or mls/m3).
|Average fuel consumption||The average fuel consumption will be shown in l/100 km (mpg) after a distance of approximately 100 metres has been travelled. The display will show dashes until this point. The displayed values will be updated approximately every 5 seconds.|
|Fuel range||Approximate calculation of the distance in km (miles) that can still be travelled with the current fuel level under the current driving conditions. One factor used for calculating this figure is the current level of fuel consumption.|
|Distance||The distance travelled in km (miles) since the ignition was switched on.|
|Average speed||The average speed will be shown after a distance of approximately 100 metres has been travelled. The display will show dashes until this point. The displayed values will be updated approximately every 5 seconds.|
|Digital speed display||Current vehicle speed displayed digitally.|
|Digital oil temperature display||Current temperature of the engine oil displayed digitally.|
|Speed warning --- km/h||If the saved speed (within the range of 30 km/h (18 mph) and 250 km/h (155 mph)) is exceeded, an audible and visible warning will be emitted.|
Switching between displays
Saving a speed for the speed warning
Deleting memory 1 or 2 manually
Personal selection of displays
In the Settings menu, you can specify which of the MFD displays should be shown in the instrument cluster display. You can also change the units of measurement for the display вЂ‰ .
a) Changes depending on the instrument cluster version.
Volkswagen Touran Service Manual. Aquaplus Design and Multi-Color Paintwork
In order to achieve error-free design and multi-colored paint applications using Aquaplus solid, metallic, pearlescent base paint, pay attention to the important notes and in some cases use special tools. Preparation: ...
Volkswagen Touran Service Manual. Tires with Rim Protector
The tire industry produces tires with rim protector for light alloy wheels (rim protector). The rim protector prevents damage to the light alloy wheels caused by contact with curbs. Using tires with rim protector on steel wheels with wheel ...