Fig. 44 Removing the front head restraint
Fig. 45 Removing a head restraint of the second or third row of seatsFirst read and observe the introductory information and safety warnings
Every seat is fitted with a head restraint. The L-shaped head restraints are each only designed for their respective seat. For this reason, do not install head restraints anywhere else.
Removing the front head restraint
Fitting the front head restraint
Removing head restraints of the second or third row of seats
Installing head restraints of the second or third row of seats
WARNINGDriving without head restraints or with incorrectly adjusted head restraints increases the risk of severe or fatal injuries in the event of an accident or sudden driving or braking manoeuvre.
NOTICEWhen removing or fitting head restraints, make sure that they do not hit the roof, the front seat backrest or other vehicle parts. This will prevent damage from occurring.
Only fold the backrest of the third row of seats with built-in head restraints forward when the seats of the second row of seats have been pushed so far forward that the head restraints of the third row of seats will not not come into contact with the backrests when they are folded forward. The backrests of the second row of seats could otherwise be damaged.
Volkswagen Touran Owners Manual. Cleaning and changing windscreen wiper blades
Fig. 181 Changing the windscreen wiper blades Fig. 182 Changing the wiper blade for the rear window First read and observe the introductory information and safety warningsвЂ‰The factory-fitted windscreen wiper blades are coated with graphite. The graphite coating ensures that windscreen ...
Volkswagen Touran Service Manual. Parking Aid Sensor, Painting
The following parameters must be met when painting to avoid malfunctions in the parking aid sensor (parking aid system): New Part, Painting Maximum coat thickness 125 mm; the coat thickness must always be measured ...