VW Touran manuals

Volkswagen Touran Service Manual: Round Connector Systems

  Note
If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to → Chapter "Secondary Lock".
   
  Guide the release tool which fits the contact housing into release channel on contact housing.
  Grasp contact at wire and push it gently into contact housing -arrow-.
  Note
By pushing the contact in the direction of the contact housing, the contact retaining tabs are lifted off the housing shoulder and can be released using the release tool.
  At the same time, push release tool in direction of contact housing -arrow- and pull the released contact out of contact housing.
  Round Connector Systems
  After removing the contact, release tool can be pulled out of the contact housing again.
  Round Connector Systems
    Primary Lock
    The primary lock is the locking mechanism of an individual crimp contact in the contact housing. If necessary, housing securing mechanisms (secondary ...

    Flat Connector Systems
      Note If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer ...

    Other materials:

    Volkswagen Touran Owners Manual. Securing mounts, roof bars or load carrying system
    Fig. 104 Vehicles without roof rails: attachment points for mounts Fig. 105 Vehicles with roof railings: attachment area for roof bars First read and observe the introductory information and safety warnings Mounts or roof bars serve as the basis for special load carrier systems. Sp ...

    Volkswagen Touran Owners Manual. Operation
    First read and observe the introductory information and safety warnings The auxiliary heater exhaust system, located under the vehicle, must not be blocked by snow, mud or other items. The exhaust fumes must not be obstructed in any way. The emissions generated by the auxiliary heater are ...

    2017-2021 © Copyright www.oticasveja.site