First read and observe the introductory information and safety warningsвЂ‰
Please follow the regulations concerning running-in of new parts.
Running in a new engine
A new engine needs to be run in during the first 1,500 km. During its first few hours of running, the internal friction in the engine is greater than later on when all the moving parts have bedded down.
The style of driving during the first 1,500 kilometres will also affect the engine quality. Even after this time - and especially with a cold engine - drive the vehicle at moderate speeds in order to reduce engine wear and to increase the mileage the engine can cover. Do not drive at engine speeds which are too low. Always shift down gear if the engine is not running smoothly. Up to 1,000 kilometres, the following applies:
From 1,000 to 1,500 kilometres, gradually increase driving performance to top speed and highest engine speed.
Running in new tyres and brake pads
If the engine is run in gently, the life of the engine will be increased and its oil consumption reduced.
Volkswagen Touran Owners Manual. Using the menus in the instrument cluster
Fig. 12 Vehicles without multi-function steering wheel: press button в’¶ in the windscreen wiper lever to confirm the menu point and rocker switch в’· to change the menu Fig. 13 Right-hand side of the multi-function steering wheel: controls for the menus in the instrument cluster First rea ...
Volkswagen Touran Service Manual. Polyurethane Adhesive Sealant
Definition: Polyurethane Adhesive Sealant -AKD 476 KD5 05- Edition 04/2009 Product Description Polyurethane Adhesive Sealant -AKD 476 KD5 05- is a paste-like, one-part adhesi ...