First read and observe the introductory information and safety warningsвЂ‰
|Step||The actions should be carried out in the given order only.|
|1.||Press the brake pedal. Keep it held down until stage 5 has been completed.|
|1 a.||Vehicles with a manual gearbox: fully depress the clutch pedal until the engine has been started.|
|2.||Select the neutral position or move the selector lever to P or N.|
|3.||Only vehicles with diesel engines: to preglow, turn the vehicle key to position вЂ‰. Indicator lamp in the instrument cluster lights up.|
|4.||Turn the vehicle key in the ignition lock to position вЂ‰ вЂ“ do not depress the accelerator.|
|5.||Release the vehicle key once the engine has started.|
|6.||If the engine does not start, stop the procedure and repeat it after approximately one minute.|
|7.||Release the handbrake if you wish to pull away вЂ‰ .|
WARNINGNever leave the vehicle with the engine running. The vehicle could move suddenly, particularly if a gear is selected, and cause accidents and serious injuries.
Start boosters could explode or cause the engine to suddenly rev.
Do not warm up the engine by running it with the vehicle stationary, but rather pull off as soon as you can see properly through the windows. This helps the engine reach operating temperature faster and reduces emissions.
Components with a high power consumption are switched off temporarily when the engine is started.
When starting from cold, the engine may be a little noisy for the first few seconds. This is quite normal, and no cause for concern.
At outside temperatures of less than +5В° C (+41В° F), fumes may be detected under the vehicle if the fuel pre-heater is switched on.
Volkswagen Touran Owners Manual. Interior mirror
Fig. 86 Manual anti-dazzle interior mirror Fig. 87 Automatic anti-dazzle interior mirror First read and observe the introductory information and safety warnings The driver must adjust the interior mirror so that the driver can see clearly the rear area through the rear window. M ...
Volkswagen Touran Service Manual. Blender
Definition: Blender -LLS MAX 009- Edition 10/2008 Product Description The Blender -LLS MAX 009- matches the overlapping areas or the edges from the existing paint to the new ...