VW Touran manuals

Volkswagen Touran Owners Manual: Using the menus in the instrument cluster

Fig. 12 Vehicles without multi-function steering wheel: press button в’¶ in the windscreen wiper lever to confirm the menu point and rocker switch в’· to change the menu

Fig. 13 Right-hand side of the multi-function steering wheel: controls for the menus in the instrument cluster

First read and observe the introductory information and safety warnings 

Calling up the main menu

  • Switch on the ignition.
  • If a message or vehicle pictogram is being displayed, press the OK button (  or  ).
  • When operated using the windscreen wiper lever: the main menu is listed.
  • When operated using the multi-function steering wheel: the main menu is not listed. To navigate through the individual menu options, press the button  or  several times   .

Calling up a sub-menu

  • Press the rocker switch   up or down or press the arrow buttons or on the multi-function steering wheel until the desired menu option is selected.
  • The selected menu option is located between the two horizontal lines. There is also a triangle on the right-hand side: .
  • To call up the sub-menu, press the OK button.

Making settings in the menu

  • Make any desired changes using the rocker switch on the windscreen wiper lever or the arrow buttons on the multi-function steering wheel. If necessary, press and hold the controls to increase or decrease the values quickly.
  • Use the OK button to mark or confirm the selection.

Returning to the main menu

  • Within the menu: in the sub-menu, select the menu option Back to leave the sub-menu.
  • Using the windscreen wiper lever: press and hold the rocker switch.
  • Using the multi-function steering wheel: press the button .
    Overview of the menu structure
    First read and observe the introductory information and safety warnings  MFD (multi-function display) Driving time Current fuel consumption Average fuel consumption Fuel range ...

    Button for the driver assist systems
    Fig. 14 On the turn signal and main beam lever: button for driver assist systems First read and observe the introductory information and safety warnings You can switch the driver assist system ...

    Other materials:

    Volkswagen Touran Owners Manual. Introduction
    This chapter contains information on the following subjects:  в†’ General information    в†’ Parking   A camera in the tailgate helps the driver when reversing or manoeuvring the vehicle. The camera picture and the orientation lines projected by the system are displayed on the ...

    Volkswagen Touran Service Manual. CAN Bus Wires, Repairing
    Unshielded two-strand wiring -1- and -2- with a cross section of 0.35 mm2 or 0.5 mm2 can be used as CAN bus wiring. The color coding of CAN bus wires can be found in the following table:   ...

    2017-2021 © Copyright www.oticasveja.site